Professional for Chain Link Fence Fabric and Parts&Metal Meshes.
High Quality,resonable price and best service
|Place of Origin:||CHINA|
|Minimum Order Quantity:||2 ROLLS|
|Packaging Details:||Bulk and then pallets|
|Delivery Time:||7-10 days after get the payment|
|Payment Terms:||T/T, L/C, D/A, Western Union, MoneyGram|
|Supply Ability:||6000 Rolls Per Month|
|Item:||Chain Link Fence Roll||Finish:||Galvanized + OEM|
|Mesh:||50mmx50mm,60mmx60mm,80mmx80mm,etc||Usage:||Garden Fence,Residential,Airport, Traffice|
chain link fence fabric screen,
chain link fencing fabric mesh
5FTx50FT Galvanized Steel Wire Chain Link Fence Fabric For Gardens
Galvanized Steel Wire Chain Link Fence Fabric Specification
|Name||chain link fence roll|
|Length||50 ft (15m)|
Galvanized Steel Wire Chain Link Fence Fabric Characteristics
|Primary Recommended Use||Containment|
|Common Height (Feet)||5|
|Common Length (Feet)||50|
If you Make a Plan to buy Chain Link Fabric Fencing Mesh
Below is the installation instruction
Use chart below to determine exact number of terminal and line posts you will need based on your final layout measurements.
Review the Material Check List on reverse side for descriptions and number of fittings required. After concrete footings have hardened, slip the tension bands over terminal posts making sure they are evenly spaced. The long, flat surface should face the outside of the fence. Carefully add brace bands making sure not to bend or distort. Bolt heads should be on the outside of the fence and threaded ends inside. Fit all post caps.
Place an eye top fitting on the end of each line post. Flat side should be toward outside of the fence. Insert one length of top rail pipe through an eye top nearest a terminal post. Insert a rail end on the top rail and attach to terminal post with a brace band. Fasten with a 5/16” x 1-1/4” carriage bolt. Continue to join lengths of top rail by forcing swedged (or crimped) ends of top rail together through eye tops. (If joining non- swedged top rail sections, sleeves can be used as pictured below). When next terminal post is reached, measure and cut the top rail to fit tightly between the last length of top rail and the rail end fastened to the brace band on the terminal post. Fasten with a carriage bolt.
1)Beginning at a terminal post, lay the chain link fabric on the ground and unroll to next terminal post. Unroll enough fabric to cover the opening between the terminal posts. (See figure below for adding and removing fabric). Insert a tension bar through the end of the fabric and attach to tension bands which were previously placed on the terminal posts. Fasten (not too tightly) with 5/16” x 1-1/4” carriage bolts - heads on the outside of the fence and threaded ends inside. Stand the entire fence section upright, leaning against the f r a m e w o r k . Loosely attach fabric to top rail with tie wires to hold
Contact Person: Karen
Tel: +86 15932304587